Rosin Removers • Metal Brighteners • Descalers • Defoamers
Neutralizers • Test Products
|
| ROSIN RESIDUE REMOVERS |
| SIMSOLV 630 |
| Description | SIMSOLV 630 is a scientifically designed solvent blend to remove rosin or resin residues from assembled circuit boards.
|
| Uses | Use by immersion through successive rinse tanks or by vapor degreasing.
|
| SIMSOLV 632 |
| Description | SIMSOLV 632 is a blend of electronic grade, non-ionic, organic solvents that offers complete removal of rosin and resin flux residues.
|
| Uses | Use as dip, spray, circulating or ultrasonic bath.
|
| METAL BRIGHTENERS |
| SIMTREAT 652 |
| Description | SIMTREAT 652 is formulated to solubilize oxides , sulfides and carbonates and other metal contaminates through a chelating process which does not etch the metal, but is aggressive as a cleaner. Material is then rinsed away with low mineral soft water or DI water.
|
| Uses | Use as a cleaner for both copper and silver prior to soldering.
|
| SIMTREAT 662 |
| Description | SIMTREAT 662 is a non-fuming, chelating cleaner scientifically designed to remove carbonates, sulfides and oxides from copper and gold-plated surfaces. It can be used full strength or diluted 1-to-1 in water.
|
| Uses | Formulated for heavily oxidized surfaces where cleaning but controlled etching is required.
|
DESCALERS
|
| SIMTREAT 600 |
| Description | SIMTREAT 600 is a concentrated descaler formulated from a blend of citric acid and surfactants. When diluted with water at a 1-to-1 radio it does an exceptional job of scale removal.
|
| Uses | Use in maintenance of in-line aqueous cleaning systems.
|
| SIMTREAT 820 |
| Description | SIMTREAT 820 is a descaler separating calcium and magnesium carbonates, bio-carbonates, sulfates and chlorides accumulated during operation of aqueous cleaning equipment including in-line conveyorized.
|
| Uses | Use on tanks, heating elements, spray nozzles, and screens.
|
| DEFOAMERS |
| SIMTREAT 608 |
| Description | SIMTREAT 608 is a non-silicone, non-ionic, defoamer. It is highly effective at reducing excessive foam. It is widely used during saponifier spray cleaning of rosin fluxes. Water rinsing will completely remove it from any assembly or part.
|
| Uses | Use in water baths or aqueous spray cleaning when excessive foam is generated.
|
| NEUTRALIZERS |
| SIMTREAT 680 |
| Description | SIMTREAT 680 is an alkaline concentrated cleaning solution which efficiently removes both organic and inorganic acid flux residuals. It performs this through both neutralization and chelation.
|
| Uses | Use in a concentrated formulation. Generally used in a 5% to 10% solution in water for the initial wash after soldering.
|
| TEST PRODUCTS |
| SIMTEST 75 |
| Description | SIMTEST 75 is a standardized alcohol and DI water solution designed to test the cleanliness of assembled circuit board assemblies.
|
| Uses | Use in Omegagraphs or Ionographs. The test solution itself should be kept at the designed composition by the addition of SIMTHIN 500. This is done through specific gravity determinations.
|
